Unbelievable Deal Alert! Get a Jaw-Dropping 15% Discount on Selected Doors and Windows When You Upgrade Your Balcony! Don't Miss Out!

balconies

TECHNICAL SHEET

Choice of colours

See all our achievements

At Fibres Futures, all our balcony designs are built in single pieces that can measure up to 12 x 24 feet. They are covered in fibreglass, polyester resin and an ISO-NPG gel coat. They have an abrasive non-slippery surface with perimeter bars completely bent, thus creating a protective filter resistant to bad weather, degradation, UV radiation and corrosion.

DESIGN 100
DESIGN 200
DESIGN 200H
DESIGN 2000
DESIGN 300
DESIGN 300H
DESIGN 3000
DESIGN 400
DESIGN 500
  • The upper surface is covered with a fibreglass layer (stitch mat) as well as a woven laminate for a layer of 4.5 ounces per square foot.
  • The upper surface is covered with a fibreglass layer (stitch mat) of 3 ounces per square foot.
  • The lower surface is covered with a fibreglass layer (stitch mat) of 1.5 ounce per square foot.
  • Hybrid version with an 8-inch composite to screw the railings, without perforating the plywood.
  • ¾-inch BC FIR (First Select) plywood.
  • Made entirely with composite.
  • Finish is made of vinyl flakes (granite) and gel coat on the surface.
  • Waterdrop moulded on the front for a better water discharge.
DESIGN 100
  • The upper surface is covered with a fiberglass layer (stitchmat) as well as a woven stratifil for a layer of 4.5 ounces per square foot.
  • The upper surface is covered with a fiberglass layer (stitchmat) of 3 ounces per square foot.
  • The lower face is covered with a fiberglass layer (stitchmat) of 1.5 ounce per square foot.
  • Hybrid version with a 8 ounces composite to screw the railings, without perforating the plywood.
  • ¾ inches BC FIR (First Select) plywood
  • Made entirely with composite
  • Finishing touch in granite and gel coat on the surface
  • A lath with drip resistant on the façade
DESIGN 200 &
300
  • The upper surface is covered with a fiberglass layer (stitchmat) as well as a woven stratifil for a layer of 4.5 ounces per square foot.
  • The upper surface is covered with a fiberglass layer (stitchmat) of 3 ounces per square foot.
  • The lower face is covered with a fiberglass layer (stitchmat) of 1.5 ounce per square foot.
  • Hybrid version with a 8 ounces composite to screw the railings, without perforating the plywood.
  • ¾ inches BC FIR (First Select) plywood
  • Made entirely with composite
  • Finishing touch in granite and gel coat on the surface
  • A lath with drip resistant on the façade
DESIGN 200H
& 300H
  • The upper surface is covered with a fiberglass layer (stitchmat) as well as a woven stratifil for a layer of 4.5 ounces per square foot.
  • The upper surface is covered with a fiberglass layer (stitchmat) of 3 ounces per square foot.
  • The lower face is covered with a fiberglass layer (stitchmat) of 1.5 ounce per square foot.
  • Hybrid version with a 8 ounces composite to screw the railings, without perforating the plywood.
  • ¾ inches BC FIR (First Select) plywood
  • Made entirely with composite
  • Finishing touch in granite and gel coat on the surface
  • A lath with drip resistant on the façade
DESIGN 400
& 500
  • The upper surface is covered with a fiberglass layer (stitchmat) as well as a woven stratifil for a layer of 4.5 ounces per square foot.
  • The upper surface is covered with a fiberglass layer (stitchmat) of 3 ounces per square foot.
  • The lower face is covered with a fiberglass layer (stitchmat) of 1.5 ounce per square foot.
  • Hybrid version with a 8 ounces composite to screw the railings, without perforating the plywood.
  • ¾ inches BC FIR (First Select) plywood
  • Made entirely with composite
  • Finishing touch in granite and gel coat on the surface
  • A lath with drip resistant on the façade
DESIGN 2000
& 3000
  • The upper surface is covered with a fiberglass layer (stitchmat) as well as a woven stratifil for a layer of 4.5 ounces per square foot.
  • The upper surface is covered with a fiberglass layer (stitchmat) of 3 ounces per square foot.
  • The lower face is covered with a fiberglass layer (stitchmat) of 1.5 ounce per square foot.
  • Hybrid version with a 8 ounces composite to screw the railings, without perforating the plywood.
  • ¾ inches BC FIR (First Select) plywood
  • Made entirely with composite
  • Finishing touch in granite and gel coat on the surface
  • A lath with drip resistant on the façade
ALL
Free quote
RAMP AND STAIRS

Find us at our new showroom and discover all our new products:

Showroom :

299 chemin Cité-des-Jeunes, St-Clet, QC J0P 1S0

Factory :

1355 chemin de la Cité-des-jeunes,
Saint-Polycarpe, QC
J0P 1S05
©Tous droits réservés

Privacy Policy

Cookie Policy

Cookie Settings

Free quote
info@fibresfutures.com

Phone : (450) 267-7818